The version number of the panel monitoring page corresponding to spot welding function is: 330 or more (inclusive)

1. How to use spot welding function

1.1 Play spot weld mode on the first page

1.2 Set the type of spot welding selected inside (fish scales/intermittent).

1.3 Set reasonable lasting time and interval time of spot welding

Two. Parameters of spot weld types and debugging

First of all, use the way of continuously welding to debug the process. And then use spot welding function to select the spot weld type

2.1 Fish scale welding mode

（In this mode, only the laser is turned off when in the intermittent, and other settings such as switching on or switching off light time do not affect and do not take effect.)

Only to set the spot welding duration and interval time can produce a fish scale welding effect, and the minimum can be set is 1ms.)

For an example

Spot welding duration: 150ms（this parameter affects the size of the streak of the weld.)

Spot welding interval time: 50ms（this parameter affects the interval between two textures.)

2.2 Intermittent welding mode

（In this mode, please turn off the laser, the shielding gas, and stop wire feeding when in the intermittent.) The other parameters such as the time of switching on or off are mainly used for fix length welding.)

By setting the spot weld duration to change the weld length, and the spot weld interval time can be set higher.

For an example

Spot welding duration: 1000ms（this parameter affects the welding length, that is, the time of light flowed up)

Spot welding interval time: 5000ms（this parameter can be fixed, and the default is 5000)

Please pay attention that in this mode, it needs to be artificially judged whether the wire is broken or not, and the wire needs to be lifted up in time.

As it has shown in the picture: